| Flight type?engineering helicopters, maximum payload is 13kg in the case of using the standard fuel tank, the weight of the fuel can also be replaced as the load if the flight time is quite short. Since the load location of this engineering aircraft is under the rotor main shaft of the plane, it can change the load weight at any time, so it can not only be used to transport items?throw away items or drop lines during the flight, but also can be used to install or carry airborne equipment of different weight, with a more flexible and convenient carrying capacity. |
| |
| Description | The parameters | Notes |
| Maximum / Average cruising speed | 90/65?Km /h? | Manual flight |
| Maximum Flying Height | 2500?m? | Manual flight |
| Rate of Climb | 4?m/s? | <4KG payload,manual flight |
| Net Weight | 16.35?Kg? | Including the main rotor, without shell |
| Take-off Weight | 35?Kg? | Including standard fuel and Flight Control Units |
| Maximum payload | 13?Kg? | |
| Standard Fuel Tank | 2.5 X 2?L? | Extensible |
| Maximum Airborne Period | 1?H? | Extensible |
| Diameter of Main Rotor/Tail Rotor | 2146/403?mm? | Material: carbon fiber |
| Gasoline Engine | 80CC | Air-cooled double opposed cylinder |
| Fuel | 93.97?Octane? | gasoline fuel (Mixing ratio 1:25) |
| Fuel Consumption | 4000?cc/h? | Mean (90% load) |
| Start-up Mode | Motor and Battery | External dedicated starter |
| Gear Ratio | 5.84/1/4.69 | Engine / Main rotor / Tail rotor |
| Battery Duration | 2?hrs? | Continuous work (Without generators) |
| Three Axis Camera Mount | 3-axis remote control | Video return and horizon gyroscope can be installed |
| Flight Control Stability Augmentation System | 3-axis gyroscope, 3 axis accelerometer 3 axis magnetic compass sensors, GPS navigation, stability increasing manipulation |
| Temperature Range | -20+50??? | Standard version |
| Total length of the aircraft | 2630/711?mm? | Main rotor blade side/Tail rotor blade side |
| Transport Box size | 1.3 X 0.5 X 0.7?m? | Packed double cardboard boxes of about 40 kg |